Loom Automation and Monitoring System : A Review
Keywords:
Loom Automation, Data Transmission (Bluetooth, Wi-Fi), Intelligent Monitoring, Laser Based Feature Detection, Convolution code, Adaptive Slicing MethodAbstract
A loom is a device used to weave cloth and tapestry. The basic purpose of any loom is to hold the warp threads under tension so that the interweaving of the weft threads can be done. A power loom is a mechanized loom powered by a line shaft and alcohol. Power Loom played a key role in developments of weaving industries during the early Industrial Revolution. There are number problems that affect the quality of loom. This includes problems like empty bobbin, weft cut etc. and to solve these problems many methodologies have been proposed. In this article we have tried to review the various available techniques as far as loom automation is concerned .We have tried to focus on the methodologies used and on the basis of the review carried out we propose to develop a weft end detection techniques based on microcontroller which will be useful in determining the end of the weft before it finishes off and thus would help in quick replacement of the weft thereby saving a lot of crucial time leading to improvement in efficiency of the system.
References
- Kunal Joarder and Daniel Raviv, Robotics Centre and Department of Electrical Engineering, Florida Atlantic University, Boca Ram, Florida 33431; “ A New Method to Calculate Looming for Autonomous Obstacle Avoidance” 1994 IEEE.11]
- Kunal Joarder and Daniel Raviv, The Electrical Engineering Department and The Robotics Centre Florida Atlantic University, Boa Raton, FX 33431, and National Institute of Standards and Technology “A Novel Method to Calculate Looming Cue for Threat of Collision” 1995 IEEE.11]
- Mark. Hassel, Arial Laser Electronics, England “Laser Based Feature Detection System Including Internal Thread Detection” IEEE2006. 2016 IJARBEST.11]
- Jurgen Freudenberger, Martin Bossert, Victor V. Zyablov, and Sergo Shavgulidze “Woven Codes with Outer Warp: Variations, Design, and Distance Properties” IEEE journal on selected areas in communication, MAY 2001.11]
- Ren C. Luo, Jyh Hwa Tzou and Yi Cheng Chang Intelligent Automation Laboratory Department of Electrical Engineering, NCCU 160 Shang-Shing, Ming-Hsiung, Chia-Yi, Taiwan 621, “The Integration of 3D Digitizing and LCD Panel Display Based Rapid Prototyping System for Manufacturing Automation” 2000 IEEE.11]
- Michael Bailey-Van Kuren Department of Manufacturing Engineering, Miami University “Automated De-manufacturing Studies in Detecting and Destroying Threaded Connections for Processing Electronic Waste” 2002 IEEE.11]
- Hitoshi Kametani, Junya Shiratsuki' 'Department of Control Engineering MNCT, Matsue, Japan “Noncontact Measurement of the Quantity of Remained Thread of a Sewing Machine Used in the Factory” August 2003.11
- Fabio Previdi, Sergio M. Savaresi, Member, IEEE, and Corrado Volpi “A Numerical Model of the Weft Yarn Filling Insertion Process in Rapier Looms” USA, June , 2006.11
- M. H. Shenassa K.N.Toosi University of technology Department of Control Engineering “Loom Data Monitoring Using Wireless Technology” 2006 IEEE.11
- GUANG-LI LIU, LU YANG ,College of Information and Electrical Engineering, CAU, Beijing 100083, China “Uncertainty Loom For Early-Warning”.11]
- Triveni Pawar, tawale pranali, patil tejaswini, B.P.Kulkarni, PVPIT, Budhgaon “Loom Automation And Monitoring System”, ijirt, 2017.
Downloads
Published
Issue
Section
License
Copyright (c) IJSRST
This work is licensed under a Creative Commons Attribution 4.0 International License.